The Hobart Institute recently hosted two employees of Lockheed Martin for three days of intensive training in advanced welding techniques. Lockheed Martin Missiles and Fire Control employees Michael Henson and David Bullock traveled from Dallas to participate in Institute classes.

"We found Hobart Institute on the Internet [http://www.welding.org] and determined that the Institute offered training that would benefit us on our jobs," said Henson. "We were pleased with the hospitality of the staff and participated in some valuable training."

The two men were seeking to learn the proper techniques for welding of titanium. One of the secrets to successful welding of titanium is cleanliness. If the material is cleaned thoroughly before welding and well-protected during welding, the process is not too difficult. However, special procedures must be employed to include the use of large
gas nozzles and trailing shields to shield the face of the weld from air. Care must be taken in the selection of electrodes and gases as well.

"Instructor Tom Crawford is well-versed in the welding of the titanium," Bullock said. "We wanted to make sure we learned the proper methods so that we would be able to perform the welds with confidence."

Specialized training is one of the things that Hobart Institute performs with ease. Experience has proven that the most productive welding training is aimed at solving specific industry needs. Use of advanced skill and technical training that incorporates state-of-the-art technology meets those needs. Realizing that down-time is expensive for companies, Hobart Institute designs tailored courses to meet specific objectives within minimum time periods.

For further information on specialized training, contact Ron Scott at (800) 332-9448, ext. 5609 or (937) 332-5609. E-mail to Ron.Scott@welding.org