Welcome to the Hobart Institute of Welding Technology (HIWT) Website!!!

400 Trade Square East Troy, Ohio 45373 U.S.A.
Industrial Welding Solutions For Today and Tomorrow
 
  

DVD SKILL TRAINING COURSES (OAW)
Skill Workbooks are also available: click here to Order Skill Workbooks

 

OXYACETYLENE WELDING, CUTTING AND BRAZING (OAW)
The oxyacetylene welding, cutting and brazing program is a complete training program. It teaches the student to flame cut plate, braze mild steel, cast iron and copper. There is related information on weld quality and applications of fuel gases, not used in this course.
 
Oxyacetylene Welding Cutting and Brazing (OAW)
Item # Qty Course Description Cost

DV30.0

Complete Course: 4 DVD's (3 hrs. 6 min); One Instructor's Guide; 4 Written Tests with 50 copies each.

 $995.00
  • Complete Course:
    • 4 DVD's (3 hrs. 6 min);
    • One Instructor's Guide;
    • 4 Written Tests with 50 copies each.

DV30.01

Topics 1-4 (50 minutes) $288.00
  • Topic 1 - Lecture/discussion, introduction to oxyacetylene welding
  • Topic 2 - Lecture/discussion, safety and health of welders
  • Topic 3 - Lecture/discussion, assembly of equipment and preparation for welding
  • Topic 4 - Stringer bead, flat position, without and with filler metal
DV30.02 Topics 5-13 (42 minutes) $276.00
  • Topic 5 - Fillet weld, lap joint, horizontal position
  • Topic 6 - Fillet weld, inside corner joint, horizontal position
  • Topic 7 - Fillet weld, inside corner joint, vertical position up
  • Topic 8 - Fillet weld, lap joint, vertical position up
  • Topic 9 - Lecture/discussion, weld quality inspection
  • Topic 10 - Square groove weld, butt joint, flat position
  • Topic 11 - Square groove weld, butt joint, vertical position up
  • Topic 12 - Square groove weld, butt joint, overhead position
  • Topic 13 - Square groove weld, butt joint, horizontal position
DV30.03 Topics 14-22 (45 minutes) $292.00
  • Topic 14 - Lecture/discussion, introduction to flame cutting (manual and machine)Topic 15 - Square and bevel cut, flat position, manual
  • Topic 16 - Square and bevel cut, flat position, manual, visual test
  • Topic 17 - Single V-groove weld, butt joint, flat position
  • Topic 18 - Single V-groove weld, guided bend test
  • Topic 19 - Single V-groove weld, butt joint, vertical position up
  • Topic 20 - Single V-groove weld, butt joint, overhead position
  • Topic 21 - Single V-groove weld, butt joint, horizontal position
  • Topic 22 - Lecture/discussion, the application of fuel gases for welding and cutting
DV30.04 Topics 23-41 (48 minutes) $292.00
  • Topic 23 - Single V-groove weld, butt joint, pipe welding, 5G position
  • Topic 24 - Single V-groove weld, butt joint, pipe welding, 2G position
  • Topic 25 - Lecture/discussion, introduction to brazing and braze welding
  • Topic 26 - Square groove braze weld, butt joint, flat position
  • Topic 27 - Fillet braze weld, corner joint, cast iron, flat position
  • Topic 28 - Fillet braze weld, corner joint, cast iron, flat position, break test
  • Topic 29 - Fillet braze, lap joint, copper, horizontal position
  • Topic 30 - Square groove weld, butt joint, flat and vertical position up
  • Topic 31 - Edge bead weld, hard surfacing
DV30.40 Instructor's Guide $49.95
DV30.41 4 Written Tests, 50 copies each $40.00

    

 
 

Copyright © 2007 HOBART INSTITUTE OF WELDING TECHNOLOGY.
All rights reserved.
Contact us:
Phone: (800) 332.9448
Fax: (937) 332.5200		 400 Trade Square East
Troy, Ohio 45373 U.S.A.
Designed by
Contacts:HIWT Personnel
Email: hiwt@welding.org		 Electronic Frontiers Consulting, Inc.